Immersion heater ETP
Immersion heater ETP with thermostat is suitable for heating or maintaining heated water in a buffer tank through electrical network,
PV or wind stations.
This type has a larger removable cover with the possibility of replacing the thermostat, which in the event of a malfunction makes it easier to
repair/replace the internal part without having to drain the water from the tank.
If you need smaller immersion heaters (from 1.5 to 3 kW and 230V), check our ETI type (right top tab on this page).
| Parameter |
Value |
| Working temperature |
30 - 75 °C |
| Material |
Stainless steel (Incoloy 825) |
| Thread |
BSP 1 1/2" (or 6/4") |
| Voltage |
3-phase |
| Overheating protection |
98 °C |
| Max. pressure |
10 bar |
| Protection level |
IP54 |
| Warranty |
2 years |
| |
ETP immersion heater types
| Type name |
Power rate |
Supply |
Immersible part |
| ETP 2,5 kW 230/400V Nerez |
2,500 W |
230 V / 400 V |
350 mm |
| ETP 3,0 kW 230/400V Nerez |
3,000 W |
230 V / 400 V |
370 mm |
| ETP 4,5 kW 400V Nerez |
4,500 W |
1 x 400 V |
420 mm |
| ETP 6,0 kW 400V Nerez |
6,000 W |
1 x 400 V |
520 mm |
| ETP 7,5 kW 400V Nerez |
7,500 W |
1 x 400 V |
620 mm |
| ETP 9,0 kW 400V Nerez |
9,000 W |
1 x 400 V |
700 mm |
| ETP 12,0 kW 3x400V Nerez |
12,000 W |
3 x 400 V |
850 mm |
| |
ETP immersion heater draw
Please click on the picture to pop-up bigger draw in new window.
|
Delivery
- Delivery throughout the EU
- Approx. 3-5 days in the UK
|
Our offer
- 280 types of tanks
- 209 tanks in stock
|
Contacts
|
